tag: GlobalFoundries

The Week In Review: Manufacturing
By Mark LaPedus - 19 Jun, 2015 - Comments: 0

Since the global economic recession of 2008-2009, the IC industry has pared down older fab capacity. From 2009-2014, semiconductor manufacturers have closed or repurposed 83 wafer fabs, including a few 300mm plants, according to IC Insights. Are 3D DRAMs finally here? SK Hynix is shipping mass production volumes of its first-generation High Bandwidth Memory (HBM1). Samsung is also backing it... » read more

Is EUV Making Progress?
By Ann Mutschler - 18 Jun, 2015 - Comments: 4

By Ann Steffora Mutschler & Ed Sperling EUV has been promised for a couple of decades, counted on for at least three process nodes on the ITRS roadmap, and considered essential to chip manufacturing since 22nm. Billions of dollars have been invested in R&D, engineering teams from around the world have contributed to its development, and still serious problems persist. Just how close... » read more

Foundries Expand Planar Efforts
By Mark LaPedus - 18 Jun, 2015 - Comments: 0

Competition is heating up in the leading-edge foundry business, as vendors begin to ramp up their new 16nm/14nm finFET processes. But that’s not the only action in the foundry arena. They are also expanding their efforts in the leading-edge planar market by rolling out new 28nm and 22nm processes. On one front, TSMC is offering new 28nm variants, based on bulk CMOS technology. And on an... » read more

Getting Over Overlay
By Mark LaPedus - 18 Jun, 2015 - Comments: 0

Chipmakers continue to migrate to the next node, but there are signs that traditional IC scaling is slowing down. So what’s causing the slowdown? Or for that matter, what could ultimately undo [getkc id="74" comment="Moore's Law"]? It could be a combination of factors. To be sure, IC design costs and complexity are soaring at each node. Scaling challenges are also playing a role. And ov... » read more

Capex Growing To A Record High In 2015
By Adrienne Downey - 18 Jun, 2015 - Comments: 0

Semiconductor companies are spending more than ever to stay competitive. In 2015, the total amount spent for capital expenditures is forecast to be $68.7 billion, up 9% from 2014’s $63.3 billion. This breaks the previous record set in 2011 at $63.8 billion, as shown in the following graph. Total Semiconductor Capital Expenditures, 2009-2015 Source: Semico Research Corp. The Top 15 A... » read more

Semiconductor R&D Crisis?
By Mark LaPedus - 11 Jun, 2015 - Comments: 3

Research and development is a sometimes forgotten but critical element in the semiconductor industry. The delicate R&D ecosystem enables many of the key breakthroughs in the business. But there could be a troubling trend, if not a crisis, brewing on two fronts in the R&D arena. On one front, R&D costs for semiconductor technologies are escalating at each node. Higher R&D costs are not only ... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 05 Jun, 2015 - Comments: 1

In what was called a defensive measure by some, Intel has announced a definitive agreement to acquire Altera for $54 per share in an all-cash transaction valued at approximately $16.7 billion. Here’s what one analyst said about the deal. “We continue to believe Intel’s pursuit of Altera–at a significant premium–was based on a defensive position, rather than the purely accretive str... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 29 May, 2015 - Comments: 0

Merger and acquisition activity continues to heat up across the semiconductor industry. On one front, Avago Technologies continues on its acquisition spree. And on another front, NXP Semiconductors is moving to spin off its RF power business. And there are other deals in the works as well, including Intel’s proposed move to buy Altera. Weston Twigg, an analyst with Pacific Crest Securities... » read more

What’s Different At 16/14nm?
By Ed Sperling - 28 May, 2015 - Comments: 0

Will finFETs live up to their promise? It depends on whom you ask, when you ask that question, and the intended application of a design. But across the semiconductor industry, there is general agreement that it's getting easier to work at the most advanced nodes as tools and flows are better understood and overall experience increases. There is no question that [getkc id="185" kc_name="finFE... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 22 May, 2015 - Comments: 0

At an event, Samsung rolled out its 10nm finFET technology. The company also showed a 300mm wafer with 10nm finFET transistors. "We have silicon-based PDKs out," said Kelvin Low, senior director of foundry marketing for Samsung. Samsung plans to move into production with its 10nm finFET technology by the end of 2016, he said. IC Insights released its chip rankings in terms of sales in the fi... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy