tag: GlobalFoundries

Brite Semiconductor: Design Services
By Ed Sperling - 20 Apr, 2015 - Comments: 0

These days it's increasingly common for large commercial foundries to have a design services counterpart—TSMC has GlobalUnichip. GlobalFoundries has an entire ecosystem as well as a dedicated partner, Invecas. And China's SMIC has Brite Semiconductor. Brite was founded in 2008 by Open-Silicon as a way to tap the Chinese market, but the startup has taken some twists since then. It now is un... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 17 Apr, 2015 - Comments: 0

It could be a long year for the equipment industry. First, Intel reduced its 2015 capital expenditure budget to $8.7 billion, plus or minus $500 million. This is down from the previous mid-point guidance of $10.1 billion. As a result of Intel’s announcement, Pacific Crest Securities cut its worldwide 2015 semiconductor CapEx forecast. The new CapEx forecast is now $62.5 billion in 2015. Th... » read more

Next EUV Challenge: Mask Inspection
By Mark LaPedus - 16 Apr, 2015 - Comments: 2

Extreme ultraviolet ([gettech id="31045" comment="EUV"]) lithography is still not ready for prime time, but the technology finally is moving in the right direction. The EUV light source, for example, is making progress after years of delays and setbacks. Now, amid a possible breakthrough in EUV, the industry is revisiting a nagging issue and asking a simple question: How do you inspect EUV p... » read more

Flash Dance For Inspection And Metrology
By Mark LaPedus - 16 Apr, 2015 - Comments: 0

Chipmakers are moving from planar technology to an assortment of 3D-like architectures, such as 3D NAND and finFETs For these devices, chipmakers face a multitude of challenges in the fab. But one surprising and oft-forgotten technology is emerging as perhaps the biggest challenge in both logic and memory—process control. Process control includes metrology and wafer inspection. Metrolo... » read more

FinFET Rollout Slower Than Expected
By Mark LaPedus - 16 Apr, 2015 - Comments: 1

The foundry business is heating up as some new and large players are entering the 16nm/14nm [getkc id="185" kc_name="finFET"] market. But foundry customers are taking longer than expected to migrate to finFETs amid some technical and cost issues. On the foundry front, [getentity id="22846" comment="Intel"] has been the sole player in finFETs for some time. But now, [getentity id="22865" ... » read more

5 Issues Under The Foundry Radar
By Mark LaPedus - 16 Apr, 2015 - Comments: 0

In the foundry business, the leading-edge segment grabs most, if not all, of the headlines. Foundry vendors, of course, are ramping up 16nm/14nm finFET processes, with 10nm and 7nm in R&D. The leading-edge foundry business is sizable, but it’s not the only thing going on in the competitive arena. In fact, there are battles taking place in many other foundry segments, such as 2.5D/3D packag... » read more

Big Acquisitions, Big Changes
By Ed Sperling - 09 Apr, 2015 - Comments: 0

Rumors swirling about Intel's romance with Altera—this has been off-again, on-again, and now apparently off-again, for the better part of a decade—coupled with Apple's decision to shift A9 APU production to Samsung and away from TSMC, NXP's pending acquisition of Freescale, along with the Chinese' government's massive semiconductor investment fund, all add up to some massive shifts under wa... » read more

How We’ll Get There from Here
By Brian Fuller - 09 Apr, 2015 - Comments: 0

The electronics industry is like a battleship with remarkable handling properties. I thought about it this week sitting at an industry event a day after stumbling across Neptune—the technology project, not the god. Those two experiences forced me to rethink some fundamental assumptions about system design and how the ecosystem responds to change. If you’ve not heard of Neptune, it�... » read more

Challenges Mount For Patterning And Masks
By Mark LaPedus - 06 Apr, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss [getkc id="80" comment="lithography"] and photomask trends with Uday Mitra, vice president and chief technology officer for the Etch Business Unit at [getentity id="22817" e_name="Applied Materials"]; Pawitter Mangat, senior manager and deputy director for EUV lithography at [getentity id="22819" comment="GlobalFoundries"]; Aki Fujimura, chief execu... » read more

Challenges Mount For Patterning And Masks
By Mark LaPedus - 30 Mar, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss lithography and photomask trends with Uday Mitra, vice president and chief technology officer for the Etch Business Unit at [getentity id="22817" e_name="Applied Materials"]; Pawitter Mangat, senior manager and deputy director for EUV lithography at [getentity id="22819" comment="GlobalFoundries"]; Aki Fujimura, chief executive at [getentity id="228... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy