tag: Lam Research

Fast Analysis Of Acoustic Resonators For The Rapidly Growing Premium RF Filter Market
By Coventor - 18 May, 2016 - Comments: 0

Acoustic resonator filters have been used in cell phones since the early 2G wireless standard. Now, typical smart phones employ 30 or more filters as mobile carriers push to support more and more data bands as well as Wi-Fi, Bluetooth and GPS. Market pressure for these RF filters to be compact and inexpensive, yet meet the higher performance requirements of the 4G standards, has spurred great i... » read more

Blog Review: May 4
By Jesse Allen - 04 May, 2016 - Comments: 0

Ready for a scuba-diving robot? Also in this week's top picks, Ansys' Justin Nescott highlights the latest, strange discovery about water plus the race to Mars. From depositing a check via smartphone to the throwaway culture of smartphones themselves, letting convenience trump security is dangerous, warns Cadence's Paul McLellan. Synopsys' Robert Vamosi looks at the sad demise of Hitomi, ... » read more

Next EUV Challenge: Pellicles
By Mark LaPedus - 27 Apr, 2016 - Comments: 1

Extreme ultraviolet (EUV) lithography is still not ready for high-volume manufacturing, but the technology is at least moving in the right direction. Both the [gettech id="31045" comment="EUV"] light source and resists are making noticeable progress, even though there are still challenges in the arena. And then, there is the EUV mask infrastructure, which also has some gaps. “When EUV i... » read more

10nm Versus 7nm
By Mark LaPedus - 25 Apr, 2016 - Comments: 20

The silicon foundry business is heating up, as vendors continue to ramp their 16nm/14nm finFET processes. At the same time, they are racing each other to ship the next technologies on the roadmap—10nm and 7nm. But the landscape is complicated, with each vendor taking a different strategy. [getentity id="22865" e_name="Samsung"], for one, plans to ship its 10nm [getkc id="185" kc_name="fi... » read more

7nm Fab Challenges
By Mark LaPedus - 21 Apr, 2016 - Comments: 3

Leading-edge foundry vendors have made the challenging transition from traditional planar processes into the finFET transistor era. The first [getkc id="185" kc_name="finFETs"] were based on the 22nm node, and now the industry is ramping up 16nm/14nm technologies. Going forward, the question is how far the finFET can be scaled. In fact, 10nm finFETs from Samsung are expected to ramp by ye... » read more

Foundries Expand Their Scope
By Ed Sperling - 21 Apr, 2016 - Comments: 0

By Ed Sperling & Mark LaPedus Major foundries are stepping up their offerings across a wide swath of technology nodes, specialty processes and advanced packaging—a recognition that end markets are fragmenting and that the path forward includes a mix of new and established processes. As the smart phone market flattens, there is no single "next big thing" to drive volume at the most ... » read more

Modeling Semiconductor Process Variation
By Coventor - 21 Apr, 2016 - Comments: 0

3D semiconductors, 3D NAND Flash, FinFETS and other advanced devices are bringing tremendous opportunities to the semiconductor industry. Unfortunately, these devices are also bringing new design, process and production problems. Process variability has been a major contributor to production delays as feature sizes have decreased and process complexity has increased. Virtual fabrication is a co... » read more

The Future Of MEMS Sensor Design And Manufacturing
By Stephen Breit - 21 Apr, 2016 - Comments: 0

I recently gave an invited talk at the IEEE Inertial Sensors 2016 symposium that discussed the future of commodity MEMS inertial sensor design and manufacturing. Inertial sensors comprise one of the fastest growing and most successful segments of the MEMS market. There are three industry trends that I believe will have major implications for motion sensor design and manufacturing and, more g... » read more

Inside Process Technology
By Mark LaPedus - 21 Apr, 2016 - Comments: 1

Semiconductor Engineering sat down to discuss the foundry business, memory, process technology, lithography and other topics with David Fried, chief technology officer at [getentity id="22210" e_name="Coventor"], a supplier of predictive modeling tools. What follows are excerpts of that conversation. SE: Chipmakers are ramping up 16nm/14nm finFETs today, with 10nm and 7nm finFETs just around... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 15 Apr, 2016 - Comments: 0

Chipmakers TSMC remained the world’s largest foundry vendor with a 54.3% share in 2015, according to the rankings from Gartner. GlobalFoundries moved into the No. 2 position with 9.6% of the market. The No. 3 position went to UMC with $4.5 billion in revenue, representing 9.3% of the market, according to the firm, which said Samsung remains No. 4. SMIC, which is No. 5, is gaining ground. ... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy