tag: 3D-IC

Chiplets For The Masses
By Brian Bailey - 03 Mar, 2021 - Comments: 2

Chiplets are a compelling technology, but so far they are available only to a select few players in the industry. That's changing, and the industry has taken little steps to get there, but timing for when you will be able to buy a chiplet to integrate into your system remains uncertain. While new fabrication nodes continue to be developed, scaling is coming to an end, be it for physical or e... » read more

The Chip Industry’s Next-Gen Roadmap
By Mark LaPedus - 21 Jan, 2021 - Comments: 1

Todd Younkin, the new president and chief executive of the Semiconductor Research Corp. (SRC), sat down with Semiconductor Engineering to talk about engineering careers, R&D trends and what’s ahead for chip technologies over the next decade. What follows are excerpts of that conversation. SE: As a U.S.-based chip consortium, what is SRC's charter? Younkin: The Semiconductor Research... » read more

2020: A Turning Point In The Chip Industry
By Brian Bailey - 28 Dec, 2020 - Comments: 3

At the start of 2020, most of the industry was upbeat and sales forecasts for the year were good. Then the pandemic hit, and fear gripped most of the industry — but not for long. New markets emerged, demand increased, and the levels of innovation went far beyond what had been forecast. While hope is on the horizon that the virus will be contained during 2021, life will not return to the ol... » read more

Stretching Engineers
By Brian Bailey - 22 Dec, 2020 - Comments: 1

Engineering has one constant — you innovate or fall by the wayside. That is true both for the things that are designed and for the engineers who design and build them. Today’s systems are putting new strains on engineers who can no longer be "tall and thin" or "short and fat." Those descriptions pertain to an engineer who is either highly specialized or one who has much broader experience. ... » read more

Variation Threat In Advanced Nodes, Packages Grows
By Ed Sperling - 21 Dec, 2020 - Comments: 0

Variation is becoming a much bigger and more complex problem for chipmakers as they push to the next process nodes or into increasingly dense advanced packages, raising concerns about the functionality and reliability of individual devices, and even entire systems. In the past, almost all concerns about variation focused on the manufacturing process. What printed on a piece of silicon didn't... » read more

Designs Beyond The Reticle Limit
By Brian Bailey - 12 Nov, 2020 - Comments: 0

Designs continue to grow in size and complexity, but today they are reaching both physical and economic challenges. These challenges are causing a reversal of the integration trend that has provided much of the performance and power gains over the past couple of decades. The industry, far from giving up, is exploring new ways to enable designs to go beyond the reticle size, which is around 8... » read more

A Renaissance For Semiconductors
By Brian Bailey - 29 Oct, 2020 - Comments: 2

Major shifts in semiconductors and end markets are driving what some are calling a renaissance in technology, but navigating this new, multi-faceted set of requirements may cause some structural changes for the chip industry as it becomes more difficult for a single company to do everything. For the past decade, the mobile phone industry has been the dominant driver for the semiconductor eco... » read more

Confusion Grows Over Packaging And Scaling
By Ann Mutschler - 15 Oct, 2020 - Comments: 0

The push toward both multi-chip packaging and continued scaling of digital logic is creating confusion about how to classify designs, what design tools work best, and how to best improve productivity and meet design objectives. While the goals of design teams remains the same — better performance, lower power, lower cost — the choices often involve tradeoffs between design budgets and ho... » read more

New Architectures, Much Faster Chips
By Ed Sperling and Ann Mutschler - 31 Aug, 2020 - Comments: 0

The chip industry is making progress in multiple physical dimensions and with multiple architectural approaches, setting the stage for huge performance increases based on more modular and heterogeneous designs, new advanced packaging options, and continued scaling of digital logic for at least a couple more process nodes. A number of these changes have been discussed in recent conferences. I... » read more

Monitoring Chips After Manufacturing
By Brian Bailey - 19 Aug, 2020 - Comments: 2

New regulations and variability of advanced process nodes are forcing chip designers to insert additional capabilities in silicon to help with comprehension, debug, analytics, safety, security, and design optimization. The impact of this will be far-reaching as the industry discusses what capabilities can be shared between these divergent tasks, the amount of silicon area to dedicate to it, ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy