tag: Applied Materials

Still Waiting For III-V Chips
By Mark LaPedus - 19 Feb, 2015 - Comments: 0

For years, chipmakers have been searching for an alternative material to replace traditional silicon in the channel for advanced CMOS devices at 7nm and beyond. There’s a good reason, too: At 7nm, silicon will likely run out of steam in the channel. Until recently, chipmakers were counting on III-V materials for the channels, at least for NFET. Compared to silicon, III-V materials provide ... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 13 Feb, 2015 - Comments: 0

First Solar announced that Apple has committed $848 million for clean energy from First Solar’s California Flats Solar Project in Monterey County, Calif. Apple will receive electricity from 130 megawatts (MW) AC of the solar project under a 25-year power purchase agreement (PPA), the largest agreement in the industry to provide clean energy to a commercial end user. Applied Materials repor... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 30 Jan, 2015 - Comments: 0

This week, IBM began to cut jobs amid lackluster results. Big Blue is also in the process of selling its chip unit to GlobalFoundries. GlobalFoundries said the jobs are safe at IBM Micro, at least for now, according to a report the Press and Sun-Bulletin. What’s the latest with Applied Materials’ proposed acquisition with Tokyo Electron Ltd. (TEL)? “Germany, Israel and Singapore approv... » read more

Next Channel Materials?
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Chipmakers are making a giant leap from planar transistors to [getkc id="185" kc_name="finFETs"]. Initially, [getentity id="22846" e_name="Intel"] moved into finFET production at 22nm and is now ramping up its second-generation finFETs at 14nm. And the other foundries will enter the finFET fray at 16nm/14nm. So what’s next? Chipmakers will likely extend the finFET architecture to both 10nm... » read more

Fab Tool R&D And Ramen Noodles
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

The semiconductor equipment and materials industry has always been a tough business. Over the years, vendors have been under pressure to develop new technologies for a shrinking but demanding customer base. And as a result, many vendors could not keep up, or elected to exit the business, causing a massive shakeout in the industry. It isn’t getting any easier, though. Today, tool and... » read more

Searching For The Next Power Transistor
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

For decades, the industry has relied on various power semiconductors to control and convert electrical power in an efficient manner. Power semis are ubiquitous, as they are found in adapters, appliances, cars, elevators, switching power supplies, power grids and other systems. But today’s silicon-based power semiconductor transistor technologies, such as IGBTs, MOSFETs and thyristors, are ... » read more

Unraveling The Mysteries At IEDM
By Mark LaPedus - 19 Dec, 2014 - Comments: 0

In some respects, the 2014 IEEE International Electron Devices Meeting (IEDM) was no different than past events. The event, held this week in San Francisco, included the usual and dizzying array of tutorials, sessions, papers and panels. On the leading-edge CMOS front, for example, the topics included [getkc id="82" kc_name="2.5D"]/[getkc id="42" kc_name="3D IC"] chips, III-V materials, [getkc ... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 12 Dec, 2014 - Comments: 0

Intel and Royal Caribbean International teamed up to integrate Intel-powered tablets onboard the Quantum of the Seas, the world’s first “smartship.” Royal Caribbean is installing 15,000 Intel-based Dell Venue tablets at point-of-sale locations on the new ship. When will Applied Materials’ proposed acquisition of Tokyo Electron Ltd. (TEL) happen? “Timing-wise we still think that it ... » read more

Fab Tool Biz Faces Challenges In 2015
By Mark LaPedus - 11 Dec, 2014 - Comments: 0

After a slight downturn in 2013, the semiconductor equipment industry rebounded and experienced a solid upturn in 2014. The recovery was primarily driven by tool spending in the foundry and [getkc id="93" kc_name="DRAM"]sectors. Another big and ongoing story continued to unfold in 2014. In late 2013, [getentity id="22817" e_name="Applied Materials"] announced a definitive agreement to acquir... » read more

What Consumers Want In Their Displays
By Max McDaniel - 11 Dec, 2014 - Comments: 0

As a leading flat panel display equipment manufacturer driving the industry roadmap, Applied Materials recently commissioned an international survey of consumers in the U.S., China and India to solicit general attitudes and preferences for mobile displays and flat screen TVs. Since most new displays pass through Applied’s equipment during production to enable higher resolution and more powerf... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy