tag: business

The Week In Review: Aug. 19
By Mark LaPedus - 19 Aug, 2013 - Comments: 0

By Mark LaPedus Applied Materials named Gary Dickerson, who has been serving as president of the company, as CEO. Mike Splinter, who held the reins since 2003, was elevated to executive chairman of the board. Dickerson served as the CEO of Varian, which Applied acquired in 2011, as well as the president and COO of KLA-Tencor. Applied Materials also announced its Q3 results. The company rep... » read more

450mm Is On Its Way!
By Adrienne Downey - 15 Aug, 2013 - Comments: 0

By Adrienne Downey Intel finally has taken the big plunge into 450mm manufacturing with the announcement of the start of construction of fab D1X Module 2. The company plans to spend $2 billion on construction of the new development fab this year alone. Its twin fab, Module 1, is 450mm-compatible, but will begin production later this year as a 300mm fab running a 14nm process technology. Intel�... » read more

Psst…Check This Out
By Katherine Derbyshire - 15 Aug, 2013 - Comments: 0

By Katherine Derbyshire It’s hard to tell when the semiconductor industry actually changes over from one technology node to the next. Process technology is among the most closely guarded of fab secrets, and things like product sales numbers aren’t far behind. There are indirect measures, though. For example, the same device with a smaller feature size will have a smaller die size, and... » read more

New Silos Form In IC Industry
By Ed Sperling - 25 Jul, 2013 - Comments: 0

By Ed Sperling For the past couple of decades corporations around the globe have been focused on down silos. In fact, it has become a mantra. It’s considered essential for making established corporations even more successful, and it’s almost always at the center of turnaround plans for troubled companies. Moreover, across a full spectrum of companies, it’s regularly cited by management c... » read more

The Week In Review: July 19
By Ed Sperling - 19 Jul, 2013 - Comments: 0

By Ed Sperling Synopsys rolled out a 28nm data converter IP portfolio for analog-to-digital and digital-to-analog converters, as well as integrated PLLs. Synopsys says the new architecture saves up to 76% of the power and 86% of area. Mentor Graphics added intelligent software-driven verification to its functional verification platform. New is the ability to automatically generate embedded ... » read more

Experts At The Table: 450mm Fab And Facilities Challenges
By Mark LaPedus - 18 Jul, 2013 - Comments: 0

By Mark LaPedus Semiconductor Manufacturing & Design sat down to discuss future 450mm fab and facilities challenges with Gerald Goff, director of the project management office for fab design and construction at GlobalFoundries; Joe Cestari, president of Total Facility Solutions; Ivo Raaijmakers, chief technology officer of ASM International; and Michael Brain, senior director of the Fab S... » read more

Foundries Eye 300mm Analog Fabs
By Mark LaPedus - 18 Jul, 2013 - Comments: 0

By Mark LaPedus In 2009, Texas Instruments changed the semiconductor landscape when it opened the industry’s first 300mm fab for analog chips. Until then, analog chip production was conducted in fabs at 200mm wafer sizes and below. With a 300mm fab, TI potentially could gain a die-size and cost advantage over its analog rivals. On paper, a 300mm wafer provides 2.5 times more chips than a... » read more

The Week In Review: July 15
By Mark LaPedus - 15 Jul, 2013 - Comments: 0

By Mark LaPedus There are more problems surfacing with extreme ultraviolet (EUV) lithography. Yes, the light source remains a problem, but the resists appear to be in decent shape. “The next challenge is the mask blank,” said Stefan Wurm, director of Sematech’s lithography program. The new problem involves ion beam deposition, which apparently is causing defects and overfill on EUV masks... » read more

Experts At The Table: Changes In The Ecosystem
By Ed Sperling - 01 Jul, 2013 - Comments: 0

By Ed Sperling Semiconductor Manufacturing & Design sat down with Michael Buehler-Garcia, director of design solutions marketing at Mentor Graphics; Seow Yin Lim, group director for marketing at Cadence; Kevin Kranen, director of strategic alliances at Synopsys, and Tom Quan, director at TSMC. What follows are excerpts of that conversation. SMD: How are chipmakers working with the rest... » read more

Experts At The Table: Changes In The Ecosystem
By Ed Sperling - 20 Jun, 2013 - Comments: 0

By Ed Sperling Semiconductor Manufacturing & Design sat down with Michael Buehler-Garcia, director of design solutions marketing at Mentor Graphics; Seow Yin Lim, group director for marketing at Cadence; Kevin Kranen, director of strategic alliances at Synopsys, and Tom Quan, director at TSMC. What follows are excerpts of that conversation. SMD: What’s changing in the ecosystem and ho... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy