tag: TSMC

Foundry Arms Race Under Way
By Mark LaPedus - 21 Feb, 2013 - Comments: 0

By Mark LaPedus A year ago, chipmakers were reeling from a severe shortage of 28nm foundry capacity, prompting foundries to ramp up their fabs at a staggering pace. At the time, foundries were unable to keep up with huge and unforeseen demand for mobile chips. The shortfall was also caused by low yields and the overall lack of installed 28nm capacity. Today, the 28nm crunch is largely ov... » read more

Accelerating Moore’s Law
By Ed Sperling - 21 Feb, 2013 - Comments: 0

By Ed Sperling Ever since the inception of Moore’s Law, process nodes have moved forward at a rate of once every 18 to 24 months. Companies have been talking about slowing down the rate of progression as things get harder, but at least for the next couple of process nodes something very strange will occur—Moore’s Law will accelerate. The root cause is growing competition for a shrinki... » read more

The Best Foundry Strategy
By Joanne Itow - 21 Feb, 2013 - Comments: 0

By Joanne Itow Today, foundries supply more than 20% of the silicon used to produce all the semiconductor products sold. The foundry impact has grown from only 10% in 1997 to 24% today. The significance of foundries is even more evident when focused on logic wafers alone. Figure 1. Foundry Wafers as a Percent of Total, IC’s, and IC’s Minus Memory [caption id="attachment_7339" align="... » read more

Taiwan: Aggressive Investments In Equipment For 2013-2014
By Christian Dieseldorff - 21 Feb, 2013 - Comments: 0

By Christian Gregor Dieseldorff Semiconductor equipment spending in 2012 declined significantly in the second half of the year as sluggish conditions in the global economy dampened some investments in the industry. Counter to this trend was spending in the Taiwan, which could come in at the $9.3 billion to $9.5 billion range. This represents $800 million more in equipment for Taiwan compared t... » read more

Making The Right Choices
By Ed Sperling - 21 Feb, 2013 - Comments: 0

FD-SOI at 28nm, or finFETs at 20/14nm? To companies looking at the cost equation, the total market opportunity for SoCs and the NRE required to get there, this is still a manageable formula. It requires lots of number crunching and some unknowns, but by the time you get done with the math it still falls within an acceptable margin of error and the choices are relatively simple. For foundries... » read more

Raising The Stakes For IP
By Ed Sperling - 14 Feb, 2013 - Comments: 0

By Ed Sperling As the amount of IP in an SoC increases, so do the number of players who want to strengthen their position in this market. The big acquisitions that began several years ago over time have proved to be just opening salvos—something that was impossible to predict when this shift began. Synopsys’ purchase of Virage Logic and Cadence’s purchase of Denali, both of which occu... » read more

Sprint To The Finish Line
By Ed Sperling - 14 Feb, 2013 - Comments: 0

By Ed Sperling Low-Power/High-Performance Engineering sat down to discuss future challenges, pain points, and how the supply chain is being reconfigured with Chi-Ping Hsu, senior vice president for R&D in the Silicon Realization Group at Cadence. What follows are excerpts of that conversation. LPHP: Has the move to 20nm processes with 14nm finFETs progressed as smoothly as everyone hop... » read more

28nm Powers TSMC Forward
By Barry Pangrle - 14 Feb, 2013 - Comments: 1

By Barry Pangrle TSMC’s financial results for Q4 of 2012 and for the full year were announced just a few weeks agom with TSMC stating it had achieved record sales and profits. Basically, TSMC currently owns the 28nm foundry market. Chairman Morris Chang was clear to distinguish 28nm from 32nm. TSMC substantially moved to the 40nm “half-node” from 45nm, and then skipped 32nm and went to 2... » read more

Math Questions
By Ed Sperling - 08 Feb, 2013 - Comments: 0

The race is on. GlobalFoundries, TSMC, Samsung, IBM and Intel are all neck deep in research, test chips, variability, lithography and three-dimensional transistor designs. For the first time, though, the goal very publicly has shifted from performance and area to energy efficiency. Being able to double battery life with existing performance over the next couple nodes could mean smart phones ... » read more

Supersizing Wafers
By Ed Sperling - 24 Jan, 2013 - Comments: 0

By Katherine Derbyshire Get ready for 450mm wafers. First seriously considered in 2005, these supersized wafers, along with the equipment to handle, measure, and process them, have gradually made their way to the top of the semiconductor industry’s priority list. But what exactly does that mean? What will 450mm fabs look like, and how will they differ from the 300-mm fabs being built toda... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy