category: Top Stories

category: Auto, Security & Edge AI

Remaking The Design Landscape
By Ed Sperling - 28 Jan, 2010 - Comments: 0

By Ed Sperling Every now and then a new trend comes along in the semiconductor design world, often because an old tool doesn’t work well anymore or because a new one is achieving critical mass. Lithography moved to immersion when the wavelength couldn’t be refracted far enough anymore. Designers at the advanced end of Moore’s Law began using tools like high-level synthesis and Transa... » read more

Verifying Low-Power Designs
By Ed Sperling - 14 Jan, 2010 - Comments: 0

By Ed Sperling Power islands and multiple voltages used to be reserved for cell phone and process companies, but as more companies move to 65nm and 45nm process nodes these approaches to saving power—particularly in chips with multiple cores—are becoming mainstream. The problem isn’t in the architecture of the chips, although that certainly brings its own set of challenges. More and m... » read more

The Power Of 3D
By Cheryl Ajluni - 14 Jan, 2010 - Comments: 0

By Cheryl Ajluni Much to the dismay of anyone who recently splurged on a new Blu-ray disk player or flat-panel HDTV, 3D stereoscopic content has become the talk of the town or, in this case, the 2010 Consumer Electronics Show. Sure, we’ve been down this road before. After all, 3D is nothing new. But it now appears ready to explode into the home in the form of 3D television (Figure 1). Bol... » read more

Low-Power Architectures Go Mainstream
By Pallab Chatterjee - 14 Jan, 2010 - Comments: 0

By Pallab Chatterjee Until recently, low power engineering has been defined by the automated use of EDA tools in the design flow to help cut back on peak dynamic power. The new generation of mobile and video products has forced a change in that methodology. There are two other fast rising architectural approaches. The first is multicore, which is prevalent in new product introductions fr... » read more

Combining Power And Synthesis
By Ann Mutschler - 14 Jan, 2010 - Comments: 0

By Ann Steffora Mutschler Each passing design node shrinks electronic designs ever smaller and more complex, which has made power management a critical design priority – even in the synthesis step in the design flow. Synthesis has always been an integral part of the design process, particularly at the RTL level. But as chip design has become more complicated, the need to raise the pro... » read more

Slow Start To Software-As-A-Service
By Pallab Chatterjee - 17 Dec, 2009 - Comments: 0

By Pallab Chatterjee Can software as a service (SaaS) really work in the SoC design tools world? While many of the large EDA vendors continue to experiment with it, the future of this model isn’t especially promising. This is contrary to the overall trend among big software makers, which even in the large enterprise applications space are finding success with SaaS and the related cl... » read more

Stacked Dies Gain Attention, But So Far Little Traction
By Ed Sperling - 17 Dec, 2009 - Comments: 0

By Ed Sperling For the better part of two decades there has been a steady stream of predictions about the abrupt end of Moore’s Law, but it now appears the formula for doubling the number of transistors on a die every couple years will simply dissipate rather than fall off a cliff. While companies such as Intel and IBM continue to develop road maps that extend their road maps all the wa... » read more

Making DFM Work Better
By Ann Mutschler - 17 Dec, 2009 - Comments: 0

By Ann Steffora Mutschler At 65nm, design for manufacturing optimization and analysis has mostly been an afterthought. At 40nm and beyond, DFM has been pushed well up into the design phase. There are good reasons for this shift. What emerged at the 65nm node were signoff tools that understand manufacturing used in semiconductor design, said Manoj Chako, a product director for digital si... » read more

The Ins And Outs Of Power Conversion
By Ed Sperling - 10 Dec, 2009 - Comments: 0

By Cheryl Ajluni Power conversion is a general term that refers to a system or device producing an output that is different than its input. It can assume many forms—everything from an inverter to an isolated power supply, uninterruptable power supply (UPS), or AC/DC converter. Power conversion, like low-power design, is fairly commonplace these days. Nevertheless, recent advances in digital ... » read more

Reducing Power In Plasma Display Panels
By Various Writers - 10 Dec, 2009 - Comments: 0

By the EEFocus staff In early 2009 there was a lot of coverage in the media at home and abroad about plasma display panel (PDP) TV sets being banned in the EU. Paul Gray, Director of European TV Research, denied the claim but did mention that they were planning to set minimum energy efficiency standards for flat-panel TVs and set maximum energy consumption limits according to screen sizes. He ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy