tag: Altera

Design For Power
By Ed Sperling - 11 Oct, 2012 - Comments: 0

By Ed Sperling Figuring out a single power budget and mapping out what has become known as holistic power intent for an SoC sounds great on paper, but reality has turned out to be somewhat different. While system architects still call the shots on how a chip is designed, there is a lot more information flowing in all directions further down the design chain these days. Unlike functionality,... » read more

The Good And Bad Of Models
By Ed Sperling - 27 Sep, 2012 - Comments: 0

By Ann Steffora Mutschler Driven by fierce competition and the fact that socket decisions are made long before silicon is manufactured, semiconductor companies today ship models and virtual prototypes to their OEMs very early in hopes of locking in the socket. Admittedly, this has been happening for some time, but due to complexity and the need for flexibility of models and virtual platf... » read more

Experts at the Table: Stacking the Deck
By Ed Sperling - 23 Aug, 2012 - Comments: 0

By Ann Steffora Mutschler System-Level Design sat down to discuss challenges to 3D-IC adoption with Samta Bansal, product marketing for applied silicon realization in strategy and market development at Cadence; Carey Robertson, product marketing director at Mentor Graphics; Karthik Chandrasekar, member of technical staff in IC Design at Altera; and Herb Reiter, president of EDA2ASIC Consulting... » read more

Experts at the Table: Stacking the Deck
By Ed Sperling - 10 Aug, 2012 - Comments: 0

By Ann Steffora Mutschler System-Level Design sat down to discuss challenges to 3D adoption with Samta Bansal, product marketing for applied silicon realization in strategy and market development at Cadence; Carey Robertson, product marketing director at Mentor Graphics; Karthik Chandrasekar, member of technical staff in IC Design at Altera; and Herb Reiter, president of Eda2Asic Consulting. ... » read more

Firms Rethink Fabless-Foundry Model
By Ed Sperling - 31 Jul, 2012 - Comments: 0

By Mark LaPedus As chipmakers move toward 20nm designs, finFETs and 3D stacked devices, the industry is beginning to re-think the fabless-foundry model. Leading-edge foundries are finally getting serious about the “virtual IDM” model, in which vendors will act more like integrated device manufacturers (IDMs), as opposed to being mere production partners. In this model, the found... » read more

Experts At The Table: Pain Points
By Ed Sperling - 27 Jul, 2012 - Comments: 0

By Ed Sperling Low-Power/High-Performance Engineering sat down with Vinod Kariat, a Cadence fellow; Premal Buch, vice president of software engineering at Altera; Vic Kulkarni, general manager of Apache Design; Bernard Murphy, CTO at Atrenta, and Laurent Moll, CTO at Arteris. What follows are excerpts of that conversation. LPHP: What comes next requires a lot of guesswork in the design, do... » read more

Experts At The Table: Stacking The Deck
By Ed Sperling - 26 Jul, 2012 - Comments: 0

By Ann Steffora Mutschler There is no doubt 3D stacking brings challenges not only from the design perspective, but also on the tool side. EDA vendors have been working for more than a few years to ready tools for stacked-die designs. How smooth the transition is, however, is a big question mark. Because the approach is new, not all the challenges are fully understood yet. And while most ED... » read more

Experts At The Table: Pain Points
By Ed Sperling - 20 Jul, 2012 - Comments: 0

By Ed Sperling Low-Power/High-Performance Engineering sat down with Vinod Kariat, a Cadence fellow; Premal Buch, vice president of software engineering at Altera; Vic Kulkarni, general manager of Apache Design; Bernard Murphy, CTO at Atrenta, and Laurent Moll, CTO at Arteris. What follows are excerpts of that conversation. LPHP: With stacked die it’s no longer one company making an SoC. W... » read more

Experts At The Table: Pain Points
By Ed Sperling - 12 Jul, 2012 - Comments: 0

By Ed Sperling Low-Power/High-Performance Engineering sat down with Vinod Kariat, a Cadence fellow; Premal Buch, vice president of software engineering at Altera; Vic Kulkarni, general manager of Apache Design; Bernard Murphy, CTO at Atrenta, and Laurent Moll, CTO at Arteris. What follows are excerpts of that conversation. LPHP: Where will the pain points be going forward? Kariat: 20nm is... » read more

Gap Vs. Gap
By Ed Sperling - 26 Apr, 2012 - Comments: 0

By Ed Sperling Among tools vendors it’s been standard practice to listen closely to customers but not deliver everything they ask for—or at least not always on the customers’ timetable. This strategy has worked well enough for both sides in the past, but at 20nm and in stacked die configurations, the level of tension between these two worlds is increasing, and the gaps in the tool cha... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy