tag: Applied Materials

Blog Review: Oct. 3
By Jesse Allen - 03 Oct, 2018 - Comments: 0

Applied's Buvna Ayyagari-Sangamalli notes that the requirements of AI are challenging the entire design ecosystem, and while new materials are necessary, so is keeping up the current pace of architecture and EDA development. Mentor's Joe Hupcey III digs into how to handle counters effectively with formal by reducing their size or replacing them with abstract models to allow formal engines to... » read more

EUV Pellicle, Uptime And Resist Issues Continue
By Mark LaPedus - 26 Sep, 2018 - Comments: 0

Extreme ultraviolet (EUV) lithography is moving closer to realization, but several problems involving scanner uptime, photoresists and pellicles need to be resolved before this long-overdue technology is put into full production. Intel, Samsung and TSMC are hoping to insert EUV into production at 7nm and/or 5nm. While the remaining issues don’t necessarily pre-empt using EUV, they do affec... » read more

The Value of Runtime Knowledge Management
By Applied Materials - 20 Sep, 2018 - Comments: 0

In clinical and commercial manufacturing when measures are taken to prevent deviations, the findings aren’t often shared across the enterprise and when corrective actions are taken to resolve an issue, they often don’t address the actual root cause(s). The Applied SmartFactory® Rx™ Knowledge Management solution allows knowledge captured in the R&D and design phases to be used th... » read more

A New Type Of Switch
By David Thompson - 20 Sep, 2018 - Comments: 0

Back in July, Applied Materials announced that we’d been selected by the Defense Advanced Research Projects Agency (DARPA) to develop technology for AI. While Applied is engaged on the development of many disruptive technologies, it’s not often that we’re in a position to discuss them in early development. Thanks to the vision of DARPA’s Electronics Resurgence Initiative and their ... » read more

Cryogenic Etch Re-Emerges
By Mark LaPedus - 20 Sep, 2018 - Comments: 0

After years in R&D, a technology called cryogenic etch is re-emerging as a possible option for production as the industry faces new challenges in memory and logic. Cryogenic etch removes materials in devices with high aspect ratios at cold temperatures, although it has always been a challenging process. Cryogenic etch is difficult to control and it requires specialized cryogenic gases in... » read more

Variation’s Long, Twisty Tail Worsens At 7/5nm
By Ed Sperling - 20 Sep, 2018 - Comments: 1

Variation is becoming a bigger challenge at each new node, but not just for obvious reasons and not always from the usual sources. Nevertheless, dealing with these issues takes additional time and resources, and it can affect the performance and reliability of those chips throughout their lifetimes. At a high level, variation historically was viewed as a mismatch between what design teams in... » read more

SiC Chip Demand Surges
By Mark LaPedus - 20 Sep, 2018 - Comments: 0

The silicon carbide (SiC) power semiconductor market is experiencing a sudden surge in demand amid growth for electric vehicles and other systems. But the demand also is causing a tight supply of SiC-based devices in the market, prompting some vendors to add fab capacity in the midst of a tricky wafer-size transition. Some SiC device makers are transitioning from 4- to 6-inch wafers in the f... » read more

Blog Review: Sept. 19
By Jesse Allen - 19 Sep, 2018 - Comments: 0

Applied Materials' David Thompson shares the new DARPA program that is focused on using correlated electrons to develop a new type of switch with quantum effects, potentially leading to unprecedented switching speeds. Mentor's Joe Hupcey III argues that for the most effective formal analysis, assertions should be as simple as possible and shares some tips on decomposing big assertions. Ca... » read more

Cobalt Shortages Ahead
By Mark LaPedus - 10 Sep, 2018 - Comments: 0

Rapid growth of electric vehicles is creating an enormous demand for cobalt, causing tight supply, high prices and supply chain issues for this critical material. Cobalt is a ferromagnetic metal and one of the key materials used in lithium-ion batteries for cell phones, notebook PCs, battery-electric cars and hybrids. It also is used in alloys and semiconductors. And while the IC industry co... » read more

3D NAND Flash Wars Begin
By Mark LaPedus - 20 Aug, 2018 - Comments: 0

3D NAND suppliers are gearing up for a new battle amid a period of price and competitive pressures, racing each other to the next technology generations. Competition is intensifying as a new player enters the 3D NAND market—China’s Yangtze Memory Technologies Co. (YMTC). Backed by billions of dollars in funding from the Chinese government, YMTC recently introduced its first 3D NAND techn... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy