tag: Siemens

Who’s Responsible For Security Breaches?
By Brian Bailey - 24 Jun, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss industry attitudes towards safety and security with Dave Kelf, chief marketing officer for Breker Verification; Jacob Wiltgen, solutions architect for functional safety at Mentor, a Siemens Business; David Landoll, solutions architect for OneSpin Solutions; Dennis Ciplickas, vice president of characterization solutions at PDF Solutions; Andrew Dauma... » read more

Wrestling With High-Speed SerDes
By Ann Mutschler - 19 Jun, 2019 - Comments: 2

SerDes has emerged as the primary solution in chips where there is a need for fast data movement and limited I/O, but this technology is becoming significantly more challenging to work with as speeds continue to rise to offset the massive increase in data. A Serializer/Deserializer is used to convert parallel data into serial data, allowing designers to speed up data communication without h... » read more

Blog Review: June 19
By Jesse Allen - 19 Jun, 2019 - Comments: 0

Mentor's Rebecca Lord digs into signal integrity complications and why today's high frequency signals make it important to understand the physics of transmission lines. Cadence's Meera Collier points to the need to recognize diversity and nuance when compiling AI training datasets and avoid the oversimplification that can lead to bias. Synopsys' Deepak Nagaria checks out the new features ... » read more

Circuit Aging Becoming A Critical Consideration
By Ann Mutschler - 17 Jun, 2019 - Comments: 5

Circuit aging was considered somebody else's problem when most designs were for chips in consumer applications, but not anymore. Much of this reflects a shift in markets. When most chips were designed for consumer electronics, such as smart phones, designs typically were replaced every couple of years. But with the mobile phone market flattening, and as chips increasingly are used in automot... » read more

Week in Review: IoT, Security, Auto
By Jeff Dorsch - 14 Jun, 2019 - Comments: 0

Products/Services Mentor, a Siemens Business, announced the release of the final phase of the Valor software New Product Introduction design-for-manufacturing technology, automating printed circuit board design reviews. The company has integrated DFM technology into the Xpedition software layout application. Arteris IP reports that Toshiba has taped out its next-generation advanced driv... » read more

Why Chips Are Getting Noisier
By Brian Bailey - 13 Jun, 2019 - Comments: 4

In the past, designers only had to worry about noise for sensitive analog portions of a design. Digital circuitry was immune. But while noise gets worse at newer process nodes, staying at 28nm does not mean that it can be ignored anymore. With Moore's Law slowing, designs have to do more with less. Margins are being squeezed, additional concurrency is added, and attempts are made to opti... » read more

Speed Up P2P Resistance Debugging With Selective Highlighting
By Slava Zhuchenya - 13 Jun, 2019 - Comments: 0

Point-to-point (P2P) resistance simulation calculates the effective parasitic resistance from one or more specified points (sources) to another set of points (sinks) on an integrated circuit (IC) layout. The results of these simulations are a key component in the verification of the robustness and reliability of IC layout interconnect—designers must have this information to accurately perform... » read more

Unveil The Mystery Of Code Coverage In Low-Power Designs: Achieving Power Aware Verification
By Mentor, a Siemens Business - 12 Jun, 2019 - Comments: 0

This paper discusses challenges in code coverage of low-power designs and approaches to overcome those challenges. Also explained is how total coverage results can be visualized in order to achieve verification closure in significantly less time. To read more, click here. » read more

BiST Grows Up In Automotive
By Ann Mutschler - 12 Jun, 2019 - Comments: 0

Test concepts and methods that have been used for many years in traditional semiconductor and SoC design are now being leveraged for automotive chips, but they need to be adapted and upgraded to enable monitoring of advanced automotive systems during operation of a vehicle. Automotive and safety critical designs have very high quality, reliability, and safety requirements, which pairs pe... » read more

Blog Review: June 12
By Jesse Allen - 12 Jun, 2019 - Comments: 0

Synopsys' Taylor Armerding warns that city and state governments aren't learning from history when it comes to ransomware, and despite numerous examples of recent attacks are not implementing proper security measures or even keeping systems patched. Cadence's Paul McLellan shares highlights from the recent Embedded Vision Summit, including how light can be used at femtosecond intervals to ob... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy