category: Manufacturing, Packaging and Materials

category: Auto, Security & Edge AI

Looking For The Next Big Innovation
By Buvna Ayyagari-Sangamalli - 18 Oct, 2018 - Comments: 0

Never has there been more demand for “The Big Innovation” — one that moves the needle for performance, power and area-cost (PPAC) in a big way — as there is in the current era of AI and machine learning (ML). As summarized in Why AI Workloads Require New Computing Architectures, AI workloads require new architectures to process data. These workloads also call for heterogeneous comp... » read more

Can Graphene Be Mass Manufactured?
By Katherine Derbyshire - 18 Oct, 2018 - Comments: 3

Since the isolation of graphene in 2004, the high mobility and unique transport properties of 2-dimensional semiconductors have tantalized physicists and materials scientists. Their in-plane carrier transport and lack of dangling bonds potentially can minimize line/edge scattering and other effects of extreme scaling. While 2-D materials cannot compete with silicon at current device dime... » read more

The State Of MEMS Process Standardization
By Serena Brischetto - 18 Oct, 2018 - Comments: 0

SEMI spoke with Udo Gómez, senior vice president at Robert Bosch GmbH, about MEMS technology requirements relative to standard IC design and manufacturing. Gómez highlighted solutions to challenges of MEMS technology development and manufacturing ahead of his presentation at the 22nd Fab Management Forum at SEMICON Europa 2018, 13-16, November 2018, in Munich, Germany. To register for the... » read more

Machine Learning Invades IC Production
By Mark LaPedus - 18 Oct, 2018 - Comments: 0

Semiconductor Engineering sat down to discuss artificial intelligence (AI), machine learning, and chip and photomask manufacturing technologies with Aki Fujimura, chief executive of D2S; Jerry Chen, business and ecosystem development manager at Nvidia; Noriaki Nakayamada, senior technologist at NuFlare; and Mikael Wahlsten, director and product area manager at Mycronic. What follows are excerpt... » read more

Variation At 10/7nm
By Ed Sperling - 18 Oct, 2018 - Comments: 1

Klaus Schuegraf, vice president of new products and solutions at PDF Solutions, explains why variability is a growing challenge at advanced nodes, why middle of line is now one of the big problem areas, and what happens when a via is misaligned due to a small process variation. https://youtu.be/jQfggOnxZJQ » read more

Manufacturing Bits: Oct. 16
By Mark LaPedus - 16 Oct, 2018 - Comments: 0

World’s fastest camera The Institut national de la recherche scientifique (INRS) in Canada has developed what researchers say is the world’s fastest camera. The camera, called T-CUP, is capable of capturing ten trillion frames per second. It’s possible to nearly freeze time to see various phenomena in the system. In a system, the technology can be used to take high-speed images of sam... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 12 Oct, 2018 - Comments: 0

Chipmakers GlobalFoundries has announced the addition of nine new partners to its RFwave Partner Program, including AkronIC, Ask Radio, Catena, University of Waterloo Centre for Intelligent Antenna and Radio Systems (CIARS), Giga Solution, Helic, Incize, Mentor Graphics and Xpeedic Technology. The RFwave Partner Program builds upon GF’s radio-frequency (RF) efforts. The new partners will pro... » read more

Manufacturing Bits: Oct. 9
By Mark LaPedus - 09 Oct, 2018 - Comments: 0

Super atoms The Technical University of Munich (TUM) has devised what it calls a super atom, a technology that could one day enable a new class of catalysts. TUM developed a cluster made up of 55 copper and aluminum atoms. The cluster looks like a crystal, but it actually has the properties of an atom or a heterometallic super atom. The super atom could one day be used to develop more cost-... » read more

Defect Challenges Growing In Advanced Packaging
By Mark LaPedus - 08 Oct, 2018 - Comments: 0

The current defect inspection systems for packaging are running out of steam for the latest advanced packages, prompting the need for new tools in the market. In response, several vendors are rolling out new defect inspection systems for use in various advanced packages, such as 2.5D/3D technologies and fan-out. The new defect inspection systems are more capable than the previous tools, but ... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 05 Oct, 2018 - Comments: 1

Chipmakers Fujitsu, once a major manufacturer of ICs, continues to move away from chip production. On Semiconductor has completed the incremental 20% share purchase of Aizu Fujitsu Semiconductor Manufacturing, Fujitsu’s 200mm wafer fab in Aizu-Wakamatsu. On Semi will now hold a 60% majority ownership in the fab joint venture. Consequently, the name of the venture will transition to On Semico... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy