category: System-Level Design

category: Auto, Security & Edge AI

The Assertion Conundrum
By Ann Mutschler - 22 May, 2014 - Comments: 2

It is well documented and widely agreed that assertions can provide a tremendous benefit to design and verification teams by reducing and even eliminating debug – but their use is still not ubiquitous. Part of the reason is that assertions cannot be picked up casually, noted David Larson, director of verification at [getentity id="22150" e_name="Synapse Design"]. “This is because asserti... » read more

New Uses For Emulation
By Ed Sperling - 22 May, 2014 - Comments: 2

Semiconductor Engineering sat down to discuss the changing emulation landscape with Jim Kenney, director of marketing for emulation at Mentor Graphics; Tom Borgstrom, director of the verification group at Synopsys; Frank Schirrmeister, group director of product marketing for the System Development Suite at Cadence; Gary Smith, chief analyst at Gary Smith EDA; and Lauro Rizzatti, a verification ... » read more

When And Where To Use Virtual Prototypes
By Ann Mutschler - 22 May, 2014 - Comments: 0

Just because something is technically possible doesn’t always mean it should be done. This definitely holds true currently when it comes to virtual prototypes, which have gotten a lot of attention for their potential in the SoC design process—especially for concurrent software development. While no one is pointing fingers, there are situations in which design teams have thrown themselves... » read more

Executive Insight: Adnan Hamid
By Brian Bailey - 22 May, 2014 - Comments: 1

Semiconductor Engineering sat down with Adnan Hamid, founder and CEO of Breker Verification Systems. Breker was founded in 2003 and has been concentrating on the creation of verification methodologies for multiprocessor SoCs using graph-based entry methods – something that became a hot topic at DVCon 2014 after Mentor Graphics decided to donate its format to Accellera for standardization. ... » read more

The Circle Of Test And EDA Is Complete
By Brian Bailey - 22 May, 2014 - Comments: 1

For those of you who were around and involved with EDA back in the early ’80s, you may remember that chip design was not the focus. It was the board that received most of the attention. Chips were small and did not require much in the way of functional verification. [getkc id="29" kc_name="Synthesis"] had not been invented and so gate-level design was where everything happened, and much of th... » read more

Big Memory Shift Ahead
By Brian Bailey - 22 May, 2014 - Comments: 1

System architecture has been driven by the performance of [getkc id="22" kc_name="memory"]. Processor designers would have liked all of the memory be fast [getkc id="92" kc_name="SRAM"], placed on-chip for maximum performance, but that was not an option. Memory had to be fabricated as separate chips and connected via a Printed Circuit Board (PCB). That limited the number of available I/O ports ... » read more

Confessions Of An ESL-Aholic
By Frank Schirrmeister - 22 May, 2014 - Comments: 0

At DAC 1997 – 17 years ago – Gary Smith coined the term “Electronic System-Level” (ESL) design. Around the same time I entered EDA when becoming part of Cadence and became very involved in ESL. Things have changed over the last 17 years quite a bit. While some of the predictions did not come true, others definitely did. Over the last couple of years the tools to be counted as part of sy... » read more

Getting To A Connected World, Step-by-Step
By Tom De Schutter - 22 May, 2014 - Comments: 0

I recently bought myself an activity tracker. The watch-like device keeps track of how many steps I take and how high I climb, such as the number of vertical feet I “conquer” by taking the stairs. From that, it calculates the distance I travel and the amount of calories that I burn in a day. The device also can measure my heart rate and the oxygen level in my blood, but given the high heart... » read more

Is Formal Ready To Displace Simulation?
By Brian Bailey - 21 May, 2014 - Comments: 2

In part one of this roundtable, the panelists talked about the recent changes that have brought formal to the forefront of verification and discussed the challenges that the UVM have brought to formal. In part two, the panel focused on the subject of coverage and the ways in which formal coverage can be combined with simulation. In this segment we start exploring the impact that sequential equi... » read more

FinFET And Multi-Patterning Aware Place And Route Implementation
By Mentor, a Siemens Business - 21 May, 2014 - Comments: 0

The use of finFETs and multi-patterning has a huge impact on the entire physical implementation flow. This paper outlines the new challenges in placement, routing, optimization, and physical verification and describes how the Olympus-SoC place and route system handles them. To view this white paper, click here. » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy