tag: Moore’s Law

Quantifying IP Entitlement For 14/16nm Technologies
By eSilicon - 24 Sep, 2014 - Comments: 0

The scaling benefits of [getkc id="74" comment="Moore"s Law"] are being seriously tested at 28nm. It is no longer a given that the cost per gate will go down at leading edge process nodes below 28nm, e.g., 20nm though 14nm. Rising design and manufacturing costs are contributing factors to this trend. Meanwhile, the competing trend of fewer but more complex [getkc id="81" comment="SoC"] (So... » read more

Executive Insight: Lip-Bu Tan
By Ed Sperling - 22 Sep, 2014 - Comments: 0

Semiconductor Engineering sat down with [getperson id="11693" comment="Lip-Bu Tan"], president and CEO of [getentity id="22032" e_name ="Cadence"], to discuss his outlook on EDA, Moore’s Law and his strategy for investing in startups around the world. What follows are excerpts of that conversation. SE: What’s worrying you these days? Tan: There are a couple of things. One is the complex... » read more

Collaboration Accelerates Moore’s Law
By Joe Gullo - 11 Sep, 2014 - Comments: 0

Moore's Law dictates that the number of transistors in dense, integrated circuits will double approximately every two years. Maintaining this pace of scaling, however, has become increasingly difficult given the ever-increasing complexity inherent with new chip starts. Additionally, the cost of using leading-edge process technology is prohibitively expensive. As a result, collaboration amon... » read more

More Problems Ahead
By Ed Sperling - 10 Sep, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss future scaling problems with Lars Liebmann, a fellow at IBM; Adam Brand, managing director of transistor technology at Applied Materials; Karim Arabi, vice president of engineering at Qualcomm; and Srinivas Banna, a fellow for advanced technology architecture at GlobalFoundries. SE: Where are the most severe issues these days? Is it on the design... » read more

Looking For The Next Big Thing
By Brian Bailey - 21 Aug, 2014 - Comments: 0

With [getkc id="74" comment="Moore's Law"] slowing down or coming to an end, finding the next big thing may be very different than it was in the past. We cannot assume that more of the same will be a winner. The semiconductor industry has been blessed with two new product categories that have catapulted it through what should have been a very difficult period with barely a scratch. Those techno... » read more

More Than Moore
By Ed Sperling - 21 Aug, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss the value of feature shrinks and what comes next with Steve Eplett, design technology and automation manager at Open-Silicon; Patrick Soheili, vice president and general manager of IP Solutions at eSilicon; Brandon Wang, engineering group director at Cadence; John Ferguson, product manager for DRC applications at Mentor Graphics; and Kevin Kranen, d... » read more

Different Approaches Emerge For Stacking Die
By Ed Sperling - 21 Aug, 2014 - Comments: 1

The concept of stacking die to shorten wires, improve performance, and reduce the amount of energy required to drive signals has been in research for at least the past dozen years at both IBM and Intel. And depending upon whom you ask, it could be another 2 to 10 years before it becomes a mainstream packaging approach—if it happens at all. At least part of the confusion stems from how you ... » read more

More Problems Ahead
By Ed Sperling - 14 Aug, 2014 - Comments: 3

Semiconductor Engineering sat down to discuss future scaling problems with Lars Liebmann, a fellow at IBM; Adam Brand, managing director of transistor technology at Applied Materials; Karim Arabi, vice president of engineering at Qualcomm; and Srinivas Banna, a fellow for advanced technology architecture at GlobalFoundries. SE: We’re starting to hear talk about octuple patterning. We’ve ... » read more

This Is What 450mm Wafers Look Like
By SEMI - 14 Aug, 2014 - Comments: 0

The first fully patterned 450mm wafers were on display at SEMICON West 2014 in South Hall and also showcased in the 450mm Technology Development Session. Fully patterned 450mm wafers produced using Molecular Imprints’ Imprio nanoimprint lithography (NIL) tool have been shown before (including at SEMI ISS meeting in January 2013). However, the 450mm wafers on display at SEMICON West were produ... » read more

More People Use Phones Than Toothbrushes…
By Karen Savala - 11 Aug, 2014 - Comments: 0

“Business Has Only Two Functions – Marketing and Innovation” — Milan Kundera There may be more to running a successful business than marketing and innovation, but these two functions were front-and-center at SEMICON West 2014. This year’s industry gathering was an important, and positive, step forward together. Because of the gravity of the challenges facing our industry – funda... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy