tag: KLA

Week In Review: Manufacturing, Test
By Mark LaPedus - 22 Jan, 2021 - Comments: 0

Chipmakers Intel posted its quarterly results. But the big question is whether the chip giant will outsource more of its production to the foundries. As reported, Intel has fallen behind TSMC and Samsung in process technology. And Intel may need to outsource some of its chip production to stay ahead. All of this rests on Pat Gelsinger, the new CEO at Intel. Gelsinger will be taking over for... » read more

More Data, More Memory-Scaling Problems
By Bryon Moyer - 14 Jan, 2021 - Comments: 0

Memories of all types are facing pressures as demands grow for greater capacity, lower cost, faster speeds, and lower power to handle the onslaught of new data being generated daily. Whether it's well-established memory types or novel approaches, continued work is required to keep scaling moving forward as our need for memory grows at an accelerating pace. “Data is the new economy of this ... » read more

Too Much Fab And Test Data, Low Utilization
By Anne Meixner - 12 Jan, 2021 - Comments: 7

Can there be such a thing as too much data in the semiconductor and electronics manufacturing process? The answer is, it depends. An estimated 80% or more of the data collected across the semiconductor supply chain is never looked at, from design to manufacturing and out into the field. While this may be surprising, there are some good reasons: Engineers only look at data necessary to s... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 31 Dec, 2020 - Comments: 0

Chipmakers and OEMs Third Point, a hedge fund, released a letter, saying that Intel needs to explore its strategic alternatives. This includes the breakup of the chip giant. Obtained by Yahoo and others, the letter says Intel needs to decide “whether Intel should remain an integrated device manufacturer” and should divest certain failed acquisitions. Here’s another analysis of the sit... » read more

200mm Demand Surges
By Mark LaPedus - 17 Dec, 2020 - Comments: 1

A surge in demand for various chips is causing shortages for select 200mm foundry capacity as well as 200mm fab equipment, and it shows no signs of abating in 2021. Foundry customers will face a shortfall of 200mm capacity at select foundries at least in the first half of 2021, and perhaps beyond. Those customers will need to plan ahead to ensure they obtain enough 200mm capacity in 2021. Ot... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 11 Dec, 2020 - Comments: 0

Government policy--semiconductors Eighteen members of the European Union have launched an initiative to boost the EU’s efforts in processors and semiconductor technologies. The member nations will also work together to bolster leading-edge manufacturing capacity. The EU plans to invest up to $145 billion in the effort. “Europe has all it takes to diversify and reduce critical dependenci... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 04 Dec, 2020 - Comments: 0

Packaging and EMS ASE is expanding its efforts in the electronic manufacturing services (EMS) business. Universal Scientific Industrial (USI), a subsidiary of ASE, has completed the acquisition of Asteelflash Group through the acquisition of its parent company, Financière. USI provides electronic design and manufacturing services. It also provides system-in-package (SiP) modules. Asteelfla... » read more

Does HW Vs. SW Choice Affect Quality And Reliability?
By Bryon Moyer - 10 Nov, 2020 - Comments: 0

Electronic systems comprise both hardware and software. Which functions are implemented with hardware and which with software are decisions made based upon a wide variety of considerations, including concerns about quality and reliability. Hardware may intrinsically provide for higher device quality, but it is also the source of reliability concerns. This is in contrast with popular views of... » read more

Chips Good Enough To Bet Your Life On
By Ed Sperling - 10 Nov, 2020 - Comments: 0

Semiconductor Engineering sat down to discuss automotive electronics reliability with Jay Rathert, senior director of strategic collaborations at KLA; Dennis Ciplickas, vice president of advanced solutions at PDF Solutions; Uzi Baruch, vice president and general manager of the automotive business unit at OptimalPlus; Gal Carmel, general manager of proteanTecs' Automotive Division; Andre van de ... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 30 Oct, 2020 - Comments: 0

Trade and government The U.S. continues to tighten its export controls for hi-tech, including a move to restrict fab technologies that enable 5nm chip production. The U.S. Department of Commerce has imposed controls on six more technologies, bringing the total to 37. They include: hybrid additive manufacturing/computer controlled tools; computational lithography software designed for EUV masks... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy