category: Top Stories

category: Auto, Security & Edge AI

Wireless Technologies For The IoE
By Ernest Worthman - 02 Apr, 2015 - Comments: 0

It's generally understood the [getkc id="76" kc_name="Internet of Everything"] eventually will be the interconnect platform of all things, wireless and wireline. The utopian scenario is to have a common platform, with standardized protocols, which everyone builds to. Will that happen? Perhaps, but for a time, especially while the IoE evolves, that won’t be the case. Count on the early IoE bei... » read more

IPsec Security In IPv6
By Ernest Worthman - 02 Apr, 2015 - Comments: 0

IPv6 is starting to show up in around the Internet. Adoption is slow, but with the magic number of 4 billion- plus IPv4 addresses about to be reached, IPv6 will see a much faster pace of adoption as the IoE gains momentum. There is a lot of excitement about all the enhancements within IPv6. Some even claim it is the answer to Internet security. But so far it has not lived up to that promise.... » read more

First Time Success and Cost Control
By Brian Bailey - 01 Apr, 2015 - Comments: 0

First time success has been the ultimate goal for semiconductor companies due to escalating mask costs, as well as a guiding objective for the development of EDA tools, especially in the systems and verification space. These pressures are magnified for the [getkc id="76" comment="Internet of Things"] (IoT), especially the edge devices. Have system-level tools been able to contribute to first ti... » read more

Architecting For Optimal Interface IP Integration
By Ann Mutschler - 31 Mar, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss the design and integration of complex interface IP with Ty Garibay, vice president of engineering at [getentity id="22849" e_name="Altera"]; Brian Daellenbach, president of Northwest Logic; Frank Ferro, senior director of product management for memory and interface IP at [getentity id="22671" e_name="Rambus"]; Saman Sadr, director of analog design... » read more

Challenges Mount For Patterning And Masks
By Mark LaPedus - 30 Mar, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss lithography and photomask trends with Uday Mitra, vice president and chief technology officer for the Etch Business Unit at [getentity id="22817" e_name="Applied Materials"]; Pawitter Mangat, senior manager and deputy director for EUV lithography at [getentity id="22819" comment="GlobalFoundries"]; Aki Fujimura, chief executive at [getentity id="228... » read more

Architecturally Optimizing Memory Bandwidth
By Ann Mutschler - 27 Mar, 2015 - Comments: 0

Making sure that an SoC’s [getkc id="22" kc_name="memory"] bandwidth is optimized is a crucial part of the design process today given its significance toward overall system performance. There are many ways to approach this issue, and all of them can have a direct bearing on the competitiveness of a chip in terms of both power and performance. So where should you start? “Number one, c... » read more

Designs Getting Squeezed
By Ed Sperling - 26 Mar, 2015 - Comments: 0

It's taking longer to get chips manufactured these days. At advanced nodes, there are more steps on the photomask side as a result of double and multi-patterning. And at established nodes, an explosion in demand for chips aimed at automotive and [getkc id="76" comment="Internet of Things"]—particularly on the industrial IoT side ([getkc id="78" kc_name="IIoT"])—has created demand-driven con... » read more

What Is Functional Accuracy?
By Ann Mutschler - 26 Mar, 2015 - Comments: 0

What it means to be functionally accurate in the context of [getkc id="104" kc_name="virtual platforms"] varies greatly, depending upon whom you ask and even when you ask them. But that doesn’t mean that functional accuracy isn’t useful. Jon McDonald, technical marketing engineer for the design and creation business at [getentity id="22017" e_name="Mentor Graphics"], expects to see a lot... » read more

Is SystemC Broken?
By Brian Bailey - 26 Mar, 2015 - Comments: 19

In order to perform architectural exploration, performance analysis and optimization, early validation of software, improved productivity in hardware development and many other tasks, the industry needs a viable [getkc id="104" kc_name="virtual prototype"]. That requires a suitable language in order to express necessary concepts at a high enough level of [getkc id="101" kc_name="abstraction"] s... » read more

Design By Architect Or Committee?
By Brian Bailey - 26 Mar, 2015 - Comments: 5

Everything we do is based on a language. It doesn’t matter if we are talking about design, verification, specification, software or mask data. They all provide a way to communicate intent, and then there are engines that work on the intent to produce something else that is desirable, also based on a language. Over time, the EDA industry has built up a hierarchy of languages from the most deta... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy