tag: 10nm

Why Investments At Advanced Nodes Matter
By Ed Sperling - 18 Sep, 2014 - Comments: 0

Despite all the talk about rising costs of development, uncertainties about lithography and talk about the death of Moore’s Law, a record number of companies are developing chips at 16nm/14nm. That may sound surprising, but asking why that’s happening is probably the wrong question. The really critical question is what they’re going to do with those chips. What’s become quite evident... » read more

One-On-One: Mark Bohr
By Mark LaPedus - 18 Sep, 2014 - Comments: 1

Semiconductor Engineering sat down to discuss process technology, transistor trends, chip-packaging and other topics with Mark Bohr, a senior fellow and director of process architecture and integration at Intel. SE: Intel recently introduced chips based on its new 14nm process. Can you briefly describe the 14nm process? Bohr: It’s our second-generation, tri-gate technology. So it has al... » read more

EDA Vendors Prepare For 7nm
By Ann Mutschler - 18 Sep, 2014 - Comments: 0

It’s not too early to begin looking at design tools for the 7nm, even though the node is not expected to be production-ready until later this decade. While still in the early stages, foundries already in development with leading EDA companies, even though the water remains murky at this point. “7nm right now is in early definition, so we don't know exactly what it will be,” observed... » read more

More Than Moore
By Ed Sperling - 15 Sep, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss the value of feature shrinks and what comes next with Steve Eplett, design technology and automation manager at [getentity id="22664" e_name="Open-Silicon"]; Patrick Soheili, vice president and general manager of IP Solutions at [getentity id="22242" e_name="eSilicon"]; Brandon Wang, engineering group director at [getentity id="22032" e_name="Cadenc... » read more

More Problems Ahead
By Ed Sperling - 10 Sep, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss future scaling problems with Lars Liebmann, a fellow at IBM; Adam Brand, managing director of transistor technology at Applied Materials; Karim Arabi, vice president of engineering at Qualcomm; and Srinivas Banna, a fellow for advanced technology architecture at GlobalFoundries. SE: Where are the most severe issues these days? Is it on the design... » read more

Week 13: Cruising The Deep Submicron
By Anne Cirkel - 05 Sep, 2014 - Comments: 1

These cooler, shorter days can only mean one thing: It’s time to get in the last beautiful late summer, early autumn motorcycle rides. Surprised? Well, I ride a 2005 Harley Davidson Dyna Low Rider. I’m a picky rider who prefers the kind of perfect weather conditions that have prevailed in Oregon during the last few weekends. Here is a little clip from a recent tour around Crater Lake in sou... » read more

What Happened To Next-Gen Lithography?
By Mark LaPedus - 03 Sep, 2014 - Comments: 2

Chipmakers continue to march down the process technology curve. Using today’s optical lithography and multiple patterning, the semiconductor industry is scaling its leading-edge devices far beyond what was once considered possible. The question is how far can the industry extend 193nm immersion [getkc id="80" comment="lithography"] and multiple patterning before these technologies become t... » read more

More Problems Ahead
By Ed Sperling - 25 Aug, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss future scaling problems with Lars Liebmann, a fellow at IBM; Adam Brand, managing director of transistor technology at Applied Materials; Karim Arabi, vice president of engineering at Qualcomm; and Srinivas Banna, a fellow for advanced technology architecture at GlobalFoundries. SE: There seems to be some debate in this group about whether we’r... » read more

Ready To Pounce
By Ed Sperling - 21 Aug, 2014 - Comments: 0

A series of inflection points at 16/14nm and beyond is having a rather unusual effect on the semiconductor industry. Rather than forge ahead with the next nodes to gain an edge and early lead over rivals—the standard formula for success over the past five decades—the entire supply chain is poised on the edge, waiting for someone to make the first move before they take action. The problem... » read more

More Than Moore
By Ed Sperling - 21 Aug, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss the value of feature shrinks and what comes next with Steve Eplett, design technology and automation manager at Open-Silicon; Patrick Soheili, vice president and general manager of IP Solutions at eSilicon; Brandon Wang, engineering group director at Cadence; John Ferguson, product manager for DRC applications at Mentor Graphics; and Kevin Kranen, d... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy