Scramble For The White Space


Chipmakers are pushing to utilize more of the unused portion of a design for different functions, reducing margin in the rest of the chip to more clearly define that white space. White space typically is used to relieve back-end routing congestion before all of the silicon area is used up. But a significant amount of space still remain unused. That provides an opportunity for inserting monit... » read more

Eliminating Ground-Loop Induced Noise


As semiconductor device performance increases, especially for low power and higher speed ICs, testing low frequency 1/f, RTN and phase noise with improved signal-to-noise ratio is required. Finding and eliminating unwanted noise is required in multiple areas. Noise sources can be found inside a prober, outside a prober, and in a measurement TestCell. Historically, TestCell-generated noise was o... » read more

Key Aspects Of Yield Management Systems For Fabless Startups


Do you work for a fabless start-up? Are you ramping up? If so, you need data-analysis tools for your production data. You will struggle without them. You have two options for yield management analysis. You may decide to hire an engineer (or team of engineers) whose job is to transfer the data from datalogs to a spreadsheet, then generate reports. Or, you could invest in a system that takes c... » read more

Ambiq YieldHUB Case Study


Ambiq Micro is leading the world in energy-efficient micro-controller (MCU) design, redefining "ultra-low-power" with its unique and proprietary SPOT platform. They began working with us a few years ago when their data started scaling (they now produce thousands of wafers a month!) and they needed an effective yield management system to help them. Senior Product Engineer Jerry Kao shares his fa... » read more

The Quest To Make 5G Systems Reliable


Semiconductor Engineering sat down to discuss 5G reliability with Anthony Lord, director of RF product marketing at FormFactor; Noam Brousard, system vice president at proteanTecs; Andre van de Geijn, business development manager at yieldHUB; and David Hall, head of semiconductor marketing at National Instruments. What follows are excerpts of that conversation. SE: How do we measure the reli... » read more

What’s WAT? An Overview Of WAT/PCM Data


Wafer acceptance testing (WAT) also known as process control monitoring (PCM) data is data generated by the fab at the end of manufacturing and generally made available to the fabless customer for every wafer. The data will typically have between forty and one hundred tests, each test having a result for each site (or “drop-in”) on the wafer. The sites are located so that the fab can monito... » read more

Resolving Particle Issues In Photolithographic Scanners


Case Study: It’s essential to quickly identify the source of airborne particles in photolithographic scanners — both to coordinate and confirm the effects of cleanings and repairs. Regrettably, most traditional methods for detecting particles have trouble addressing particle issues proactively. Consider in-situ methods as an example. Conventional in-situ scanners do not provide access to... » read more

New Test Methods For 5G Wafer High-Volume Production


In order to provide the chips required for this change in the landscape, there will be a large number of changing requirements in wafer test that come out of these architectural requirements. Form Factor partnered with Intel to investigate these changes, and tested one such example of a new test methodology. In a joint collaboration with Intel to develop a test methodology for their 5G RF-So... » read more

Are Chips Getting More Reliable?


The semiconductor industry is making huge progress in understanding the causes and telltale signs of circuit aging and irregular behavior. But are devices actually getting more reliable? The answer depends on a number of factors, none of which is easily measured. To be sure, circuits are much better designed and inspected than in the past, and the individual components are printed more accur... » read more

New Data Format Boosts Test Analytics


Demand for more and better data for test is driving a major standards effort, paving the way for one of most significant changes in data formats in years. There is good reason for this shift. Data from device testing is becoming a critical element in test program decisions regarding limits and flows. This is true for everything from automotive and medical components to complex, heterogeneous... » read more

← Older posts Newer posts →